There is no more natural heater in the universe than the sun. It creates a combustion of gases that warm the surface of the earth. Even when the temperature dips, the radiant heat will still warm you. The gas fired infrared heaters Ohio manufacturing companies produce work in a similar way. They use fuel to produce heat and warm whatever is beneath it, like machinery, tools, floors, and people. The targets warm up and release more heat which warms the air.
This type of heating is a godsend for industrial businesses that operate in large, open space warehouses. Many of these businesses resort to forced air heaters that are built into the ceilings of their facilities and blow hot air at the rate of a jet engine. This can work for some businesses, but it is inefficient and expensive. Infrared heating is up to fifty percent more efficient than forced air.
This heating method can be low or high intensity. High intensity has been on the scene for almost three quarters of a century. It requires a high mounting and operates with the use of an open flame. Reflectors are used to direct the source of the heat. This method can be effective if there are only a few workers in an area that isn't vented.
Low intensity heat systems generate radiant heat just like the sun. They are hung from the ceiling by chains. You can get them vented or unvented. If necessary outside air can be used for combustion. The rate of heat is controlled by a thermostat. The design allows for different configurations depending on the space requirements.
Low intensity heaters have an enclosed flame. In order to produce heat a burner box triggers a mix of air and gas. A fan forces the air and gas mixture through tubing. The tube emits heat energy from the gas onto reflectors, which direct the warmth onto the floor. The objects in the direct line of the reflected heat warm the space to a comfortable level. This kind of heat starts at the ground level instead of the ceiling to create heat in the space.
If you're working with a forced heat system, every time you open a door the heat escapes. The system has to start over to heat the space. If you have infrared heat on the other hand, the heat from the floor acts as a reservoir that retains the extra heat and continues to heat the area until the loss of heat from the door opening is marginalized.
There are many benefits from this type of heating, not the least of which is the cost savings. This type of heater is up to fifty percent more cost effective than the forced air variety. They are cleaner and quieter and don't blow dust and debris around like the ones that rely on blowers. These heaters have zoned capabilities that can function as a unit or independently.
It is very important to take safety into consideration when using these heating systems. Objects that have lower temperature ratings have to kept at a safe distance from these heating units. Lighting, electrical and gas lines, and parked vehicles have to be protected from the system.
This type of heating is a godsend for industrial businesses that operate in large, open space warehouses. Many of these businesses resort to forced air heaters that are built into the ceilings of their facilities and blow hot air at the rate of a jet engine. This can work for some businesses, but it is inefficient and expensive. Infrared heating is up to fifty percent more efficient than forced air.
This heating method can be low or high intensity. High intensity has been on the scene for almost three quarters of a century. It requires a high mounting and operates with the use of an open flame. Reflectors are used to direct the source of the heat. This method can be effective if there are only a few workers in an area that isn't vented.
Low intensity heat systems generate radiant heat just like the sun. They are hung from the ceiling by chains. You can get them vented or unvented. If necessary outside air can be used for combustion. The rate of heat is controlled by a thermostat. The design allows for different configurations depending on the space requirements.
Low intensity heaters have an enclosed flame. In order to produce heat a burner box triggers a mix of air and gas. A fan forces the air and gas mixture through tubing. The tube emits heat energy from the gas onto reflectors, which direct the warmth onto the floor. The objects in the direct line of the reflected heat warm the space to a comfortable level. This kind of heat starts at the ground level instead of the ceiling to create heat in the space.
If you're working with a forced heat system, every time you open a door the heat escapes. The system has to start over to heat the space. If you have infrared heat on the other hand, the heat from the floor acts as a reservoir that retains the extra heat and continues to heat the area until the loss of heat from the door opening is marginalized.
There are many benefits from this type of heating, not the least of which is the cost savings. This type of heater is up to fifty percent more cost effective than the forced air variety. They are cleaner and quieter and don't blow dust and debris around like the ones that rely on blowers. These heaters have zoned capabilities that can function as a unit or independently.
It is very important to take safety into consideration when using these heating systems. Objects that have lower temperature ratings have to kept at a safe distance from these heating units. Lighting, electrical and gas lines, and parked vehicles have to be protected from the system.
About the Author:
For a closer look at the benefits of gas fired infrared heaters Ohio customers should turn to our recommended homepage and read all the information. Find what you need right here at http://www.westernreserveenergy.com/products.
No comments:
Post a Comment