In most cases, decks are made out of wood. Wood is a preferable material because it is natural and it offers a high level of beauty. However, to preserve the color and grain of the wood, regular maintenance is mandatory. There are many ways that this can be achieved and one of them s to cover the wood when the deck is not in use. A second alternative is to stain it. When one needs Wood Deck Staining New Jersey Offers the perfect location to visit.
Normally, these structures are exposed daily to the hot sun. After a given duration, the wood that is not sealed begins to get damaged due to radiations from the sun. Discoloration and warping are the two major effects that radiation from the sun causes on timber. Despite the fact that warping and discoloration are natural effects that occur to wood, exposure to sunlight accelerates the process.
The wood parts that experience warping eventually become prone to cracks and more warping. This can all be avoided by application of a high-quality stain over the surface to preserve it. The stain functions to protect the layers underneath from damage and in turn preventing further warping.
The stain also plays an important role in preventing water from different sources including rain from infiltrating into the timber. Decks absorb a lot of water when exposed to rain and cold if they are left unprotected. This water is favorable for the growth of mold and mildew. It is common for timber soaked with water to rot away by expanding and becoming soft. Between water and timber, the stain acts as a barrier.
The results that a person will get depend very much on the kind of preparation undertaken before the deck staining project. First, one must thoroughly clean the timber. Before the stain is applied the surface has to completely smooth. In case the surface is dirty, then the final work will be poorly done since penetration of the stain into the timber will be interfered with.
If the surface is new or has been installed a few days ago, mill scale needs to be removed by thoroughly cleaning it. If the surface is an old one and the stain is only being reapplied, old stains, mildew, and dirt need to be removed before application. A deck scrub should be used when doing the cleaning. Scrub kills mildew and also makes it easier to remove dirt and grime that has formed over time.
Once cleaning has been completed, one can start the stain application process. Stains are different and so one should read the instructions that are on the label before starting work. One should pay special attention to what the manufacturer says about the number of coats that should be applied and how long one should wait between applications.
A brush or a paint roller can be used for the application process. Preference is given to the paint brush as it helps to push the stain into timber grains. Brushes achieve better results as they generate friction that improves stain absorption by the wood. Before using the surface, one should allow enough time for it to dry.
Normally, these structures are exposed daily to the hot sun. After a given duration, the wood that is not sealed begins to get damaged due to radiations from the sun. Discoloration and warping are the two major effects that radiation from the sun causes on timber. Despite the fact that warping and discoloration are natural effects that occur to wood, exposure to sunlight accelerates the process.
The wood parts that experience warping eventually become prone to cracks and more warping. This can all be avoided by application of a high-quality stain over the surface to preserve it. The stain functions to protect the layers underneath from damage and in turn preventing further warping.
The stain also plays an important role in preventing water from different sources including rain from infiltrating into the timber. Decks absorb a lot of water when exposed to rain and cold if they are left unprotected. This water is favorable for the growth of mold and mildew. It is common for timber soaked with water to rot away by expanding and becoming soft. Between water and timber, the stain acts as a barrier.
The results that a person will get depend very much on the kind of preparation undertaken before the deck staining project. First, one must thoroughly clean the timber. Before the stain is applied the surface has to completely smooth. In case the surface is dirty, then the final work will be poorly done since penetration of the stain into the timber will be interfered with.
If the surface is new or has been installed a few days ago, mill scale needs to be removed by thoroughly cleaning it. If the surface is an old one and the stain is only being reapplied, old stains, mildew, and dirt need to be removed before application. A deck scrub should be used when doing the cleaning. Scrub kills mildew and also makes it easier to remove dirt and grime that has formed over time.
Once cleaning has been completed, one can start the stain application process. Stains are different and so one should read the instructions that are on the label before starting work. One should pay special attention to what the manufacturer says about the number of coats that should be applied and how long one should wait between applications.
A brush or a paint roller can be used for the application process. Preference is given to the paint brush as it helps to push the stain into timber grains. Brushes achieve better results as they generate friction that improves stain absorption by the wood. Before using the surface, one should allow enough time for it to dry.
About the Author:
When you are searching for information about wood deck staining New Jersey residents can come to our website today. More details are available at http://www.aaapressurewash.com/why-stain-your-deck-4-reasons-to-use-exterior-wood-stain now.
No comments:
Post a Comment